Roll-On, distributed by The Final Floor, Inc. Orders and support: (740) 746-8373

Products

Coatings, sealer, and floor care made for roller skating floors.

Roll-on logo

Roll-On Skate Floor Finish

A one-part, oil-based finish for roller skating floors. It dries to a high gloss. You pour it from a sprinkling can and spread it with rollers. Do not thin or dilute it.

When you recoat, one coat is often enough for one skating season.

Colors
Clear, Blue
Pail size
5 gallons
Coverage
450 square feet per gallon
Applied with
18 inch commercial rollers, 3/8 or 1/2 inch nap
Application temperature
68 to 74 degrees F
Walk on
12 to 24 hours
Skate on
24 hours
Additional coats
24 to 48 hours
Shelf life
About 12 months, properly stored

Drying times depend on floor and material temperature, air exchange, and humidity.

Traction logo

Traction water-based system for wood floors

Seal new or freshly sanded wood with Traction Wood Floor Sealer. Finish with two coats of Traction Wood Floor Coating.

Pail of Traction Waterborne Urethane Floor Coating

Traction Wood Floor Coating

Water-based urethane coating for wood skate floors. Apply two coats with a Padco floor coater.

  • Wait 3 to 6 hours between coats. Do not wait longer than 6 hours.
  • Back in use 24 hours after the final coat. Allow 24 to 36 hours before heavy use.
  • Do not apply above 85 degrees F or 50% relative humidity.
  • Not for bare wood. Seal new or freshly sanded floors first.
Bottle of Traction Catalyst
Traction Catalyst comes with itMix the catalyst into both coats. Use catalyzed Traction within 24 hours.
Pail of Traction Waterborne Wood Floor Sealer

Traction Wood Floor Sealer

Clear, water-based seal coat for newly installed or freshly sanded wood floors.

  • Apply two coats. Each coat dries in about two hours.
  • First coat covers up to 500 to 600 square feet per gallon. Second coat covers up to 700.
  • Wood moisture content must be under 10% before you seal.
  • For water-based top coats only. Not recommended under solvent-based floor coatings.

Roll-On or Traction?

Roll-On Skate Floor FinishTraction Wood Floor Coating
BaseOilWater
PartsOne partCoating plus catalyst
Applied with18 inch rollersPadco floor coater
ColorClear or BlueClear coat. Goes over any color.
Skate on24 hours24 hours
New or bare woodTwo coats of oil-modified urethane sealer firstTraction Wood Floor Sealer first

Floor care

Poor maintenance makes a skate floor slippery. Drag the floor daily with an untreated dry mop and clean it weekly with Traction Cleaner.

Gallon jug of Traction Cleaner

Traction Cleaner

Non-residue cleaner concentrate. One gallon makes 32 gallons of cleaning solution.

Call for pricing
60 inch microfiber drag mop

Microfiber Drag Mop Set, 60 inch

60 inch twisted yarn mop head, 60 inch mop frame, and 63 inch mop handle.

Call for pricing
72 inch microfiber drag mop

Microfiber Drag Mop Set, 72 inch

72 inch twisted yarn mop head, 72 inch mop frame, and 63 inch mop handle.

Call for pricing
Never use string mops or treated drag mops on a skate floor. Floor care guide (PDF) Safety Data Sheet: Traction Cleaner (PDF)